Hole Fill Operator - 2nd shift

The Hole Filling Operator applies conductive or non-conductive pastes to pre-drilled holes in printed circuit board panels.



  • Apply conductive on non-conductive pastes to pre-drilled panels according to process documented in work instructions for Screening and Hole Filling
  • Properly mix and apply pastes. Inspect for tiny pin holes in paste
  • Tape off all holes that are not to be filled
  • Use a syringe to apply certain products to isolated holes
  • Use ovens for drying panels. Verity correct bake temps and times
  • Perform manual sanding and machine sanding with tools provided
  • Perform required preventative maintenance on all associated equipment in accordance with work instructions
  • Must adhere to all health and safety guidelines, including requirements for keeping the area clean and organized as documented in written process procedures. Required to utilize all appropriate safety equipment and to receive annual RCRA and safety training
  • Maintain a clean, orderly work area


Other Duties:

  • Maintaining a clean work environment
  • Product verification of panels processed
  • Environmental regulations for proper chemical handling and storage of chemicals
  • Preventive maintenance on equipment
  • The employee is responsible to follow all RCRA standards as outlined by the certification that he or she has been trained to at all times. The health and safety regulations encompass the cleanliness of the area that he or she will be working as a result
  • May handle hazardous waste as outlined in departmental work instructions
  • Perform other duties as assigned
Required Skills:
  • Solid knowledge of math
  • Strong attention to detail
  • Ability to work around chemicals
  • Good computer skills
  • Ability to perform visual inspection
  • PCB manufacturing experience preferred, but not required
  • Ability to produce quality work under pressure
  • Able to understand and follow daily work direction, shop travelers and process instructions in English as received verbally or in writing from supervisor or other qualified person
  • Ability to understand and follow posted procedures
  • Ability to understand and follow all safety codes


Physical/Mental Demands:

  • Ability to lift up to 50 lbs. and work in noisy manufacturing environment (hearing protection provided)
  • Ability to work in chemical and mechanical environments
  • Extensive use of arms and shoulders in performance of manual hole filling and sanding procedures
  • Ability to stand on feet in one location for extended periods during 8 hour shift
  • Meet all safety requirements for performing duties
Required Experience:

Experience: 0-2 Years Relevant Experience. Previous printed circuit board manufacturing experience preferred. General manufacturing experience helpful.

Must be eligible to work on defense and satellite programs subject to ITAR Regulations. Therefore, candidates must be a U.S. Citizen or a U.S. Permanent Resident ('Green Card').

Anaren is a VEVRAA/Federal Contractor and EEO/AA Employer, including disabled and veterans.

Location: Littleton
Category: Regular Full-time
Tracking Code: 2013228

Have questions? Let Us Know.

Contact Us

Need Help?

In accordance with the Americans with Disabilities Act and Executive Order 11246, Anaren provides reasonable accommodation to applicants with disabilities. Applicants who need different or additional accommodations for any part of the application and hiring process are encouraged to contact our Human Resources Department by calling 315-432-8909 or writing 6635 Kirkville Road, East Syracuse, NY 13057.


Anaren is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetics, national origin, age, disability or protected veteran status. Anaren is a drug-free workplace.